Multimedia Engineering Drawing Animations to Improve Vocational High School Students' Technical Drawing Concepts

Mujiarto Mujiarto; M Komaro; A Djohar

doi:10.35445/alishlah.v14i1.1287

Multimedia Engineering Drawing Animations to Improve Vocational High School Students' Technical Drawing Concepts

Mujiarto Mujiarto, M Komaro, A Djohar

Abstract

The purpose of the research to develop innovative multimedia animation engineering drawing (MMAED) in the field of technology and engineering in Vocational High Schools. The research method used is research and development which broadly covers the manufacturing, and testing stages. The study population was vocational students in the fields of technology and engineering expertise. Learning is done in two different classes, namely: Class A as a control class, and class B as an experimental class. Data collection tools in the form of tests, rubrics, and questionnaires. Data were analyzed by descriptive analysis, percentage, and N-gain. The results of this study are Multimedia Animation Engineering Drawing (MMAED) with special characteristics that are accessible or affordable to the eyes and logic of students, by orthogonal projection material that requires imagination or imagination of the appearance of an object. The mastery of the concept of orthogonal projection material has increased after using MMAED, so that it reaches a high category.

Keywords

learning material, orthogonal projection, innovative, multimedia animation

Full Text:

PDF

References

Agusta, I. (2015). Pengembangan media pembelajaran website bilingual “Close to Radioactivity” sebagai sumber belajar kimia secara mandiri Siswa SMA/ MA.

Ahmad, A., Kamin, Y., & Minghat, H. D. (2013). A Conceptual Model for Vocational Teaching Method as AnApproach to Enhance Students Learning. 2nd International Seminar on Quality and Affordable Education (ISQAE 2013).

Anas, L. (2019). PENGEMBANGAN SISTEM APLIKASI MULTIMEDIA INTERAKTIF. Jurnal Teknologi Pendidikan, 21(1), 24–41. https://doi.org/https://doi.org/10. 21009/jtp.v21i1.10570

Baukal, Charles E., J. ., Ausburn J., & Lynna. (2016). Multimedia Category Preferences of Working Engineers. European Journal of Engineering Education, 41(5), 482–503.

Blikstein, P., & Worsley, M. (2016). Multimodal Learning Analytics and Education Data Mining : Using Computational Technologies to Measure Complex Learning Tasks Marcelo Worsley. Journal of Learning Analytics, 3(2), 220–238.

Borg, W., & Gall, J. (1983). Educational research. Allyn and Bacon.

Budiman, A. (2012). Development of computer based learning media about continous variable transmission (CVT) on motorcycle subject at vocational high school (SMK). Journal of Education, 5(1).

Bustanil, S. M., & Ardianto, D. T. (2019). Pengembangan Media Pembelajaran Interaktif Berbasis Video Tutorial Di Sekolah Menengah Kejuruan. Jurnal Teknologi Pendidikan, 21(2), 119–134. https://doi.org/https://doi.org/10.21009/jtp.v21i2.11568

Chiou, C.-C., Tien, L.-C., & Lee, L.-T. (2015). Effects on learning of multimedia animation combined with multidimensional concept maps computers and Education.

Firdania, M. S. (2016). Aplikasi CAI Berbasis Multimedia untuk Pengenalan Bagian Tubuh Manusia pada Anak Usia Dini. Untan, 1(1).

Fratandha, Z. M., Suherman, A., & Komaro, M. (2015). Penggunaan multimedia animasi untuk meningkatkan kemampuan berpikir kritis dalam pembelajaran materi penguatan logam pada mata kuliah material teknik. Journal of Mechanical Engineering Education, 2(2), 312–322.

García-Rodicio, & Héctor. (2014). Support for Learning from Multimedia Explanations. A Comparison of Prompting, Signaling, and Questioning. Journal of Educational Computing Research, 50(1).

Hadibin, M. M., Purnama, B. E., & Kristianto, G. (2012). PEMBANGUNAN MEDIA PEMBELAJARAN TEKNIK KOMPUTER JARINGAN KELAS X SEMSTER GANJIL PADA SEKOLAH MENENGAH. Indonesian Journal on Computer Science, 9330, 1–6.

Hake, R. R. (1999). Analyzing Change/Gain Score. Indiana University.

Hake, R. R. (2002). Relationship of Individual Student Normalized Learning Gains in Mechanics with Gender , High-School Physics , and Pretest Scores on Mathematics and Spatial Visualization . * †. In Physics Education Research Conference, 8, 1–14.

Hakim, L., Susilowibowo, J., & Widayati, I. (2014). Analisis hasil penelitian pengembangan bahan ajar dan modul pembelajaran akuntansi di SMK pendukung implementasi kurikulum 2013. Prosiding Seminar Nasional Pendidikan Akuntansi Dan Keuangan “pengembangan Pendidikan Akuntansi Dan Keuangan Yang Berkelanjutan.

Hidayat, S. (2020). Upaya Penigkatan Penguasan Teknologi Guru Smk Negeri Darang Dan Melalui Supervisi Akademik Multi Media. Syntax Literate : Jurnal Ilmiah Indonesia, 4(8), 12–26.

Kartika, M. D., Santyasa, W., & Warpala, W. (2014). PENGARUH MODEL PEMBELAJARAN BERBASIS MASALAH. E-Journal Program Pascasarjana Universitas Pendidikan Ganesha, 4.

Katsioloudis, P., Dickerson, D., Jovanovic, V., & Jones, M. (2015). Evaluation of Static vs. Dynamic Visualizations for Engineering Technology Students and Implications on Spatial Visualization Ability: A Quasi-Experimental Study. Engineering Design Graphics Journal, 79(1).

Komaro, M. (2015). Rancang bangun E-Book berbasis multimedia animasi dalam peningkatan penguasaan konsep dan keterampilan pemecahan masalah pada mata kuliah material teknik untuk calon guru SMK program keahlian mesin produksi. UPI.

Kuswana, W. S. (2011). Taksonomi Berpikir. Remaja Rosdakarya.

Liao, S. Z., Liang, J. H., & Li, Y. D. (2012). Application of Multimedia Animation Technology in Learning Power Updating Knowledge. Applied Mechanics and Materials, 239–240.

Muljono, P. (2006). Kajian Relevansi Kurikulum SMK dengan Kebutuhan Pengembangan Teknologi Masa Depan di Indonesia. Jurnal Penyuluhan, 2(3).

Rhodes E., A. (2013). The Effect of Teacher Designed Multimedia on Student Comprehension and Retention Rates within Introductory College Science Courses. In ProQuest LLC. Kansas State University.

Situmorang, M., Sitorus, M., & Situmorang, Z. (2015). Pengembangan Bahan Ajar Kimia SMA/ MA inovatif dan interaktif berbasi multimedia. Prosiding Semirata 2015.

Slameto. (2010). Belajar dan faktor-faktor yang Mempengaruhinya. PT. Rineka Cipta.

Soenarto. (2005). Metodologi Penelitian Pengembangan untuk Peningkatan Kualitas Pembelajaran (Research Methodology to Improvement of Instruction). PPTK dan KPT.

Soma, I. M., Candiasa, I. M., & Tegeh, I. M. (2014). Pengembangan bahan ajar menggambar dengan perangkat lunak berbantuan program aplikasi autocad. E-Journal Program Pascasarjana Universitas Pendidikan Ganesha Prodi Teknologi Pembelajaran, 4.

Tien, L.-C., Chiou, C.-C., & Lee, Y.-S. (2018). Emotional Design in Multimedia Learning : Effects of Multidimensional Concept Maps and Animation on Affect and Learning. EURASIA Journal of Mathematics, Science and Technology Education, 14(12), 1–17. https://doi.org/https://doi.org/10.29333/ejmste/94229

Torkunova, J. V. (2014). The Peculiarities of Qualitative Information, Analytical Maintenance Innovative and Educational Activity Technological Projection in Higher Educational Institution. Life Science Journal, 11(8).

Tridiana, R., & Rizal, F. (2020). Keterampilan Guru Abad 21 Di Sekolah Menengah Kejuruan ( SMK ). Jurnal Imiah Pendidikan Dan Pembelajaran, 4(2), 221–231. https://ejournal.undiksha.ac.id/index.php/JIPP/article/viewFile/25268/15440

Wiana, W. (2018). Interactive Multimedia-Based Animation : A Study of Effectiveness on Fashion Design Technology Learning Interactive Multimedia-Based Animation : A Study of Effectiveness on Fashion Design Technology Learning. Journal of Physics: Conference Series, 953(1), 1–8. https://doi.org/10.1088/1742-6596/953/1/012024

Widiaty, I. (2017). Relevansi Kurikulum Smk Berbasis Industri Kreatif Dengan Metode Extrapolation and the Econometric Approach. Innovation of Vocational Technology Education, 9(1), 29–42. https://doi.org/10.17509/invotec.v9i1.4882

Widisila, K., Suharsono, N., & Kirna, I. M. (2014). Pengembangan bahan ajar multimedia memperbaiki poros penggerak roda untuk kelas XI teknik otomotif SMK Negeri Nusa Penida. E-Journal Program Pascasarjana Universitas Pendidikan Ganesha, 4.

Widodo, W. (2010). Pengembangan model pembelajaran “mikir’’ pada perkuliahan fisika dasar untuk meningkatkan keterampilan generik sains dan pemecahan masalah calon guru SMK program keahlian tata boga.” UPI.

DOI: https://doi.org/10.35445/alishlah.v14i1.1287